Line reactors for the frequency converter and motors
They are dry type iron core three phases or single phase, made by H class copper wires or aluminum foil. Reactors have the features of high linearity, high over-load capability and low losses. Vacuum impregnation by polyester resin material provides better insulation function, high voltage stress, low noise and long lifetime. The number and position of air gaps are selected in order to minimize losses in magnetic core and windings. Limbs, yokes and air gaps are blocked by adhesives and pressing elements designed to reduce acoustic noise. Reactors are equipped with thermal protection to prevent over-heating. The reactors are designed with natural air cooling.
| Technical data |
| Rated voltage |
230V to 690V |
| Rated frequency |
50Hz |
| Dielectric test |
50Hz 3KV,60s |
| Cooling method |
natural air |
| Ambient temperature |
-10 to +40ºC |
| Protection class |
IP00 indoor mounting |
| Inductance tolerance |
0/+5% |
| Elevation above sea level |
≤2000m a.s.l. |
| Reference standard |
EN 60076-6 EN 61558-2-20 |
| Insulation class |
H |
| Design method |
Single phase or three phase |
| Maximum humidity |
95% |
| Blocking factor p% |
5.67%,6%,7%,14% |
| Noise level |
<60dB |
| Linearity |
1.55-2.2In
|
| Winding material |
Copper wire/ Aluminum Foil |
| Terminals |
Copper terminals, CUPONAL ba |
Other specifications are available upon request
2016 Hannover Messe
